ZENITH R H 80 - Technical parameters
| Technical specifications | |
| General parameters | |
| Type | ZENITH R H 80 |
| Band |
80 GHz
71.000 – 76.000 GHz / 81.000 – 86.000 GHz
|
| Duplex spacing (MHz) | flexible; typ 10 GHz, min 5 GHz, max 15 GHz |
| Channel bandwidth (MHz) |
250, 500, 750, 1000, 1250, 1500, 1750, 2000 MHz
(62.5 and 125 MHz only available for ACMB) |
| Type of duplex traffic | FDD (Frequency division duplex) |
| Modulation scheme | 2PSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM |
| Transmission capacity max. | up to 10 Gbps |
| Radio Parameters | |
| Transceiver | |
| Output power max.(dBm) |
-6 to +20 dBm
(+17 dBm @ 32QAM; +16 dBm @ 64QAM; +14 dBm @ 128QAM) |
| Automatic power control | ATPC (range 26 dB) |
| ACMB |
Hitless - including bandwidth reduction to 1/2 or 1/4 and stronger FEC
(together with RF Output power regulation increases the system gain by up to 35.5 dB) |
| Sensitivity, BER 10-6 |
-85 dBm (25 Mb/s)
-76 dBm (200 Mb/s) -68 dBm (1 Gb/s) -59 dBm (4 Gb/s) -53 dBm (7 Gb/s) -46.5 dBm (10 Gb/s) |
| Forward error correction FEC |
LDPC
|
| Ethernet (user data & management) | |
| Ethernet interfaces | 1 Gb Eth. 10/100/1000BASE-T Auto MDI/MDIX |
| Optical interfaces | 10 Gb Eth. SFP+ slot for 1000/2500/5000/10000 BASE-T; 1000/10000 BASE-SX; 1000/10000 BASE-LX(power max. 3 W) |
| Maximal packet length | 10240B |
| Throughput L1 (RFC 2544) | 10000 Mb/s (64-128 B frames); 9512 Mb/s (1518 B frames) |
| Latency L1 @ 10 Gb/s (RFC 2544, one way) | 12.9 μs (64 B frames); 23.5 μs (1518 B frames) |
| Synchronization | Synchronous Ethernet*; PTP(IEEE-1588v2 transparent clock)* |
| Management, Diagnostics, Monitoring | |
| Management | Web (HTTP, HTTPS), CLI (SSH, Telnet) |
| SNMP | SNMP v2c including configurable TRAPs |
| Real time monitoring | RSS, MSE, BER |
| Diagnostic tools | Spectrum analyzer, Pinger |
| Antenna alignment | RSS voltage, Smartphone app, Web |
| Statistics | RMON counters for all interfaces |
| History charts | Temperature, Power voltage, RSS, MSE, BER, Data rate, RF Output power |
| ODU connection | |
| Cable type | S-STP/S-FTP Cat. 7 cable up to 100 m length, optical fiber |
| Antennas | |
| Size | 0,3 / 0,6 |
| Class | ETSI Class 2 or Class 3 |
| Polarization | Single polarization |
| Power supply | |
| Power supply | PoE active IEEE 802.3bt (POE++); PoE passive 37– 60 VDC; DC 37 – 60 VDC; floating |
| Power consumption | 35 W @ channel ≤ 500 MHz; 37 W @ 1000 MHz; 42 W @ 2000 MHz; max 45 W (with SFP+) |
| Temperature range, environmental | |
| Outdoor unit | -30 to +55°C |
| Protected terminal box | -25 to +55°C |
| Ingress protection | IP66 |
| Surge immunity | 4 kV (EN 61000-4-5) |
| ESD resistance | 8 kV (EN 61000-4-2) |
| MTBF (Mean Time Between Failure) | > 1 000 000 hours (> 114 years) projected |
| Operating humidity | 5 to 95% non-condensing |
| ODU / Terminal box dimensions and weight | |
| Height x Width × Depth (cm) | 16×24.5×24.5 / 16.3 x 14.7 × 4.4 |
| Weight (kg) | 2.8 (6.1 lbs) / 0.5 |
*pending
