Release 1.1.3.0 2021-01-29 New features: AES Encryption of user traffic (new menu 'Link settings / Radio / Encryption') Radio loopback (new menu 'Tools / Live data / Radio loopback') Fixed bugs: Provider Bridge switch configuration (menu 'Switch / Advanced / VTU') Minor internal SW fixes and improvements Known issues: The differential external configuration backup ('Backup to external file / Difference') does not work correctly. The full external configuration backup ('Backup to external file / Full') works perfectly After FW upgrade from versions 1.0.19.0 and earlier unit time has to be checked and manually corrected (may be wrong if time zones were used) After FW upgrade from versions 1.0.16.0 and earlier it is strongly recommended to set '!FlowControl receive' for port 'Air (p9)' to value 'on' ('Show Defaults' + 'Apply' in menu 'Switch settings / Interface / Port'). It improves an utilization of Ethernet switch buffers and allows higher throughput of the link for real traffic *** Release 1.1.1.0 2020-09-29 New features: Ethernet switch - Quality of Service is fully configurable (new menu 'Switch settings / QoS') Security libraries update Fixed bugs: Calculation of BER values, BER graphs Minor internal SW fixes and improvements Known issues: The differential external configuration backup ('Backup to external file / Difference') does not work correctly. The full external configuration backup ('Backup to external file / Full') works perfectly After FW upgrade from versions 1.0.19.0 and earlier unit time has to be checked and manually corrected (may be wrong if time zones were used) After FW upgrade from versions 1.0.16.0 and earlier it is strongly recommended to set '!FlowControl receive' for port 'Air (p9)' to value 'on' ('Show Defaults' + 'Apply' in menu 'Switch settings / Interface / Port'). It improves an utilization of Ethernet switch buffers and allows higher throughput of the link for real traffic *** Release 1.0.22.0 2020-06-18 Notice: Time should be checked and manually corrected after FW upgrade from versions 1.0.19.0 and earlier (may be wrong if time zones were used) New features: Support for new USB/ETH adapter AXAGON ADE-XR Fixed bugs: Minor internal SW fixes and improvements Known issues: Graph BER shows more than 3 orders of magnitude higher error rate than the reality is. Occasional reboots looks to be finally solved already in FW version 1.0.21.0. If any unexpected reboot, strange behavior or other incident occurs, please please contact Technical support on http://www.al-wireless.com/helpdesk-form-3. The differential external configuration backup (Backup to external file / Difference) does not work correctly. The full external configuration backup (Backup to external file / Full) works perfectly. After FW upgrade from FW versions 1.0.16.0 and older it is strongly recommended to set '!FlowControl receive' for port 'Air (p9)' to value 'on' (Show Defaults + Apply in menu Switch settings / Interface / Port). It improves an utilization of Ethernet switch buffers and allows higher throughput of the link for real traffic. *** Release 1.0.21.0 2020-04-22 Notice: Time should be checked and manually corrected after FW upgrade from versions 1.0.19.0 and earlier (may be wrong if time zones were used) New features: Added locks for more secure communication in the unit kernel Kernel and watchdog monitoring and logging extended Fixed bugs: Improved driver of internal system SPI bus (originally third-party SW piece) Known issues: Occasional reboots looks to be finally solved in this version (by 2 improvements above, which should address the source of the issue). If any unexpected reboot, strange behavior or other incident occurs, please contact Technical support on http://www.al-wireless.com/helpdesk-form-3. The differential external configuration backup (Backup to external file / Difference) does not work correctly. The full external configuration backup (Backup to external file / Full) works perfectly. After FW upgrade from FW versions 1.0.16.0 and older it is strongly recommended to set '!FlowControl receive' for port 'Air (p9)' to value 'on' (Show Defaults + Apply in menu Switch settings / Interface / Port). It improves an utilization of Ethernet switch buffers and allows higher throughput of the link for real traffic. *** Release 1.0.20.0 March 2020 Notice: Time should be checked and manually corrected after FW upgrade (time may be wrong if time zones were used) New features: Higher password strength (length 5-80 bytes, wider set of password characters - UTF-8) Improved behavior after short link disconnection Removed feature: RSTP root bridge (pages 'Switch settings / Status / RSTP' and 'Switch settings / Advanced / RSTP') Fixed bugs: Time settings and handling Occasional ACM freezing on low modulations Minor web interface fixes and improvements (graph axis, Flow control ...) Known issues: Occasional reboots may still happen in a very small percentage of links. In such a case please run the CLI command "cli_wdog_holdon -b" (in CLI or in box Command on the page Tools/Programs/CLI) on both sides of the link. This command prevents spontaneous reboots and starts to log internal system watchdogs (the reason for reboots). Then please contact Technical support on http://www.al-wireless.com/helpdesk-form-3. The differential external configuration backup (Backup to external file / Difference) does not work correctly. The full external configuration backup (Backup to external file / Full) works perfectly. After FW upgrade from FW versions 1.0.16.0 and older it is recommended to set '!FlowControl receive' for port 'Air (p9)' to value 'on' (Show Defaults + Apply in menu Switch settings / Interface / Port). It improves utilization of Ethernet switch buffers and allows higher throughput of the link for real traffic.